HDPE welding induku

Incazelo emfushane:

Ubukhulu: 2.0mm ~ 4.0mm
Ubude: 2000mm noma obunye ubude.
Umumo: Umjikelezo owodwa, uyindilinga kabili, unxantathu.
Standard Colors: Natural, White, Black, Blue and any other colours according to customers’ requirements.

XHUMANA MANJE layisha phansi ku-pdf

Imininingwane

Omaka

Incazelo Yomkhiqizo

Induku yokushisela ipulasitiki ye-polyethylene yenziwe nge-polyethylene yebanga eliphakeme kanye ne-masterbatch yombala ngokushisa, ukwenza ipulasitiki kanye nenqubo yokukhipha. Isetshenziswa ngomshini wokushisela we-plastic extrusion ukuhlanganisa izingxenye zezinto ezifanayo ze-polyethylene ndawonye.

Main production equipment :
(1) extruder (2) electrode cutting machine

Isici semikhiqizo

1.Ukumelana ne-Abrasive ehlala ine-polymer ye-thermoelectricity.
2.Best ukushaqeka ukumelana ngisho lokushisa eliphansi.
3.Low frictional factor, kanye nezinto ezikwazi ukushelela kahle
4.I-Lubricity (akukho khekhe, ukunamathela)
I-5.Okungcono kakhulu ukumelana nokugqwala kwamakhemikhali kanye nokumelana ne-stress craze
6.Ikhono elihle kakhulu lenqubo yemishini
7.Ukumuncwa kwamanzi okuphansi kakhulu
I-8.Paragon insulativity kagesi kanye nokuziphatha kwe-antistatic
9.Nice high energy radioactive ukumelana

Production Process

Kneading is carried out in an ordinary Z-type kneader or a high-speed kneader. When using 45mm extruder, the screw speed is controlled in 15~24r/min. The temperature
of the first section of the extruder is generally 160~170 ° C, the temperature of the
second section is 170~180 ° C, and the head temperature is between 170~ 90 ° C.
Cooling is carried out in the cooling water tank, usually divided into two stages of
cooling, the first stage is cooled by hot water spray, the water temperature is 40~60℃, the second stage is cooled by cold water. The welding rod is cut at room temperature after cooling.
Isitifiketi senduku yokushisela ye-HDPE:
I-ROHS.

Ukupakisha: ngobude noma ngemiqulu ngesikhwama sepulasitiki.

I-R&D

Our company has our own laboratory, we will test the raw materials and finished products of HDPE welding rod , and prohibit the outflow of unqualified products.

Izinhlelo zokusebenza

Plastic welding rod is mainly used with plastic extrusion welding machine to weld the HDPE/LDPE geomembrane or other polyethylene sheets/plates, containers, pipelines and tanks etc.

Uma unentshisekelo ngemikhiqizo yethu, ungakhetha ukushiya imininingwane yakho lapha, futhi sizokuthinta maduzane.

Bhala umyalezo wakho lapha futhi usithumelele wona