I-polyethylene intonga ye-welding yeplastiki yenziwe kwi-polyethylene yodidi oluphezulu kunye nombala we-masterbatch ngokufudumeza, iplastiki kunye nenkqubo ye-extrusion. Isetyenziswa kunye neplastiki extrusion welding machine ukubophelela amacandelo ezinto ezifanayo polyethylene kunye.
Main production equipment :
(1) extruder (2) electrode cutting machine
1.Abrasive resistance which always have in thermoelectricity polymer.
2.Best ukothuka ukothuka nokuba kubushushu obuphantsi.
I-3.I-Frictional factor ephantsi, kunye nezixhobo zokuthwala kakuhle
4.Lubricity(akukho caking, ekuncamatheleni)
I-5.Eyona nto ingcono yokuxhathisa ukubola kweekhemikhali kunye noxinzelelo lwe-craze resistance
6.Ubuchule benkqubo yoomatshini obugqwesileyo
7.Ukufunxa amanzi asezantsi
I-8.I-Paragon ye-insulativity yombane kunye nokuziphatha kwe-antistatic
9.Nice amandla aphezulu ukumelana neradioactive
Kneading is carried out in an ordinary Z-type kneader or a high-speed kneader. When using 45mm extruder, the screw speed is controlled in 15~24r/min. The temperature
of the first section of the extruder is generally 160~170 ° C, the temperature of the
second section is 170~180 ° C, and the head temperature is between 170~ 90 ° C.
Cooling is carried out in the cooling water tank, usually divided into two stages of
cooling, the first stage is cooled by hot water spray, the water temperature is 40~60℃, the second stage is cooled by cold water. The welding rod is cut at room temperature after cooling.
Isiqinisekiso sentonga ye-welding ye-HDPE:
ROHS.
Ukupakisha: ubude okanye kwimiqulu ngengxowa yeplastiki.
Our company has our own laboratory, we will test the raw materials and finished products of HDPE welding rod , and prohibit the outflow of unqualified products.
Plastic welding rod is mainly used with plastic extrusion welding machine to weld the HDPE/LDPE geomembrane or other polyethylene sheets/plates, containers, pipelines and tanks etc.