Akwụkwọ PVC siri ike (UV kwadoro)

Nkọwa dị mkpirikpi:

Nha:
Ogologo oke: 1mm ~ 30mm
Obosara: 1mm ~ 3mm: 1000mm ~ 1300mm
4mm ~ 20mm: 1000mm ~ 1500mm
25mm ~ 30mm: 1000mm ~ 1300mm
35mm ~ 50mm: 1000mm
Ogologo: Ogologo ọ bụla.
Ụdị ọkọlọtọ: 1220mmx2440mm; 1000mmx2000mm; 1500mmx3000mm.
Standard agba: ọchịchịrị isi awọ (RAL7011), ìhè isi awọ, nwa, na-acha ọcha, blue, green, red na ihe ọ bụla ọzọ na agba dị ka ndị ahịa 'chọrọ.
Elu: kenkowaputa, matt, embossed.

Kpọtụrụ ugbu a gbadaa na pdf

Nkọwa

Tags

Ihe omuma nka maka PVC mpempe akwụkwọ siri ike UV kwụsiri ike:

	Ọkọlọtọ nnwale (GB/T 22789.1-2008)	Nkeji	Uru a na-ahụkarị
Anụ ahụ
Njupụta	1.45~1.5	g/cm³	1.45
Mechanical
Ike Tensile ( Ogologo/ Ogologo)	≥45	Mpa	52.9/48.9
Ogologo oge ( Ogologo / Uro)	≥8	%	29/32
Ike Mmetụta Notch ( Ogologo/ Ogologo)	≥5	KJ/㎡	7.83/7.57
Mmetụta Charpy Unnotched0℃-20℃	—– —–	KJ/㎡ KJ/㎡	pendulum 4J Sample adịghị agbaji
Ike Ehulata V=2mm/min	—–	Mpa	76.2
Ike Indentation Bọọlụ 358N (h: 0.118 ~ 0.138)	—–	N/m㎡	221
Thermal
Okpomọkụ na-eme ka Vicat dị nro	≥70	Celsius C	76.8
Okpomọkụ Mbelata ( Ogologo/ Ogologo)	-4~+4	%	+1.9/-0.1
Okpomọkụ mgbapụ n'okpuru ibu ( Ogologo/Breadth)	—–	Celsius C	69.5/69.7
Chemical
35%±1% (v/v) HCI 5h 60°C	±10	g/cm3	+5
30%±1% (v/v) H2SO4 5h 60°C	±8	g/cm3	+4
40%±1% (v/v) HNO3 5h 60°C	±8	g/cm3	+4
40%±1% (v/v) NaOH 5h 60°C	±5	g/cm3	+2
Eletriki
Mgbochi olu	—–	ohm·cm	5.5 × 10¹³

Ngwa:
A na-eji PVC siri ike Ibé akwụkwọ UV kwụsie ike n'ozuzu na ụlọ ọrụ kemịkalụ, dị ka akụrụngwa Lab, Etching equipment, Semiconductor processing equipment, plating barrels, water tank, chemical store tank, tank tank, tank tank for brewing water, acid ma ọ bụ alkali mmepụta ụlọ elu. , acid ma ọ bụ alkali ịsacha ụlọ elu, foto na-emepụta ngwá ọrụ; Ụlọ ọrụ eletrik maka igbe batrị, efere electrometer, tank electrolytic na efere dị iche iche maka mkpuchi ọkụ eletrik, akara ngosi maka mgbasa ozi, mgbidi mgbidi nke ụlọ ọrụ na ụlọ ọrụ ọha na eze, oghere ọnụ ụzọ na ihe ndị ọzọ.

R&D:
1.Our ụlọ ọrụ adopts gburugburu ebe obibi-enyi na enyi raw material.Strictly ịchịkwa mmepụta usoro, si akụrụngwa na factory oyi akwa quality inspection.The nnwale ule na-esote mba àgwà management na asambodo usoro iji hụ na àgwà nke ngwaahịa.
2.Our ụlọ ọrụ guzobere ọnụ ọgụgụ nke nnwere onwe nnwale, na a elu ogo nke akpaaka nke mmepụta ngwá, kwa afọ itinye ego buru ibu, iwebata talent na nkà na ụzụ, nwere ike siri ike nnyocha sayensị.

Ọ bụrụ na ị nwere mmasị na ngwaahịa anyị, ị nwere ike ịhọrọ ịhapụ ozi gị ebe a, anyị ga-akpọtụrụ gị n'oge na-adịghị anya.

Dee ozi gị ebe a ziga anyị ya