• Read More About Welding Rod

Nov . 19, 2026 00:37 Back to list

How to Choose a PVC Sheet for Extraction Equipment


A PVC grey sheet suits extraction equipment buyers who need a rigid, weldable sheet for chemical service. Check thickness, available width, surface, chemical conditions and fabrication needs before ordering.

How to Choose a PVC Sheet for Extraction Equipment
Illustration for reference; see the product page for actual photos and specifications.

Extraction equipment needs a rigid sheet that can be formed into tanks, towers, barrels or related chemical equipment. Our PVC grey sheet for extraction is intended for this type of work, with a glossy surface, multiple color options and thicknesses from 1mm to 60mm.

Match the sheet to the equipment

Choose this PVC sheet when the project needs a rigid material that can be fabricated, welded or machined. Its listed applications include etching equipment, plating barrels, water tanks, chemical storage tanks, acid or alkali production towers, and acid or alkali washing towers. That makes it a practical fit for extraction-related equipment where the design depends on shaped or joined sheet sections.

The sheet also has chemical and corrosion resistance, impact strength, rigidity and electrical insulation properties. For a chemical installation, match the sheet to the actual liquid, concentration, temperature and exposure time in your process. The listed chemical results cover hydrochloric acid, sulfuric acid, nitric acid and sodium hydroxide conditions, so those figures are useful starting points for a material review.

Check the working specifications

Thickness and sheet width determine how the material fits your equipment design and fabrication plan. The available thickness range is 1mm to 60mm. Width varies by thickness:

Sheet thicknessAvailable width
1mm to 3mm1000mm to 1300mm
4mm to 20mm1000mm to 1500mm
25mm to 30mm1000mm to 1300mm
35mm to 60mm1000mm

Standard sizes are 1220mm × 2440mm, 1000mm × 2000mm and 1500mm × 3000mm. Any length is available. Measure the equipment panels, access route and joining layout together, since a sheet that fits the design may still be difficult to move or position if its format is too large.

The surface is glossy. Standard colors include dark gray (RAL7011), light gray, black, white, blue, green and red, with other colors available according to customer requirements. Select the color and surface finish according to your identification, appearance and fabrication plan.

Use the material figures during review

The sheet has a density of 1.447g/cm3, tensile strength of 42.2MPa and notch impact strength of 5.5kJ/m2. Its Vicat softening point is 78.0℃. Heating dimension change is +0.5% in the transverse direction and -3.0% in the direction listed for the product.

PropertyProduct value or requirement
Densityρ≤1.45g/cm3, result 1.447g/cm3
Tensile strength≥40MPa, result 42.2MPa
Notch impact strength≥5kJ/m2, result 5.5kJ/m2
Vicat softening point≥75℃, result 78.0℃
Heating dimension change, transverse±4%, result +0.5%
Heating dimension change, direction±4%, result -3.0%

For chemical service, the listed corrosivity results are 0.55g/m2 for 35%±1 (V/V) HCL at 5h and 60℃, 0.5g/m2 for 30%±1 (V/V) H2SO4 at 5h and 60℃, -0.8g/m2 for 40%±1 (V/V) HNO3 at 5h and 60℃, and 0.05g/m2 for 40%±1 (V/V) NaOH at 5h and 60℃. Compare your process chemistry with these conditions before selecting the sheet for an extraction vessel or related equipment.

What to weigh

Chemical service · Match the process liquid and conditions to the listed chemical results.

Fabrication plan · Check thickness, width, length, welding, machining and joining needs.

Equipment format · Compare standard sizes with panel dimensions and site access.

Material review · Use tensile, impact, thermal and dimensional-change values in selection.

Your shortlist

PVC grey sheet for extraction · Rigid sheet for chemical equipment, tanks, towers, barrels and fabricated parts.

Plan fabrication before placing the order

The sheet is suitable for fabrication, welding and machining. If your design needs milled parts, send us a sketch or construction drawing with the required quantity so we can prepare an offer for the parts. For a sheet-built extraction system, define the panel dimensions, thickness, color, quantity and joining method in the inquiry. Also include the chemical conditions and operating temperature you need the material to face, then ask us to match the request to the PVC grey sheet specification.

The company

Baoding Lida Plastic Industry Co., Ltd.

PRODUCT APPLICATION Our products are widely used within the field of chemical, engineering, electronics, food, medical treatment, water supply and drainage projects, construction materials, farm irrigation, sea breading, electricity communication and other industries. Our products are widely used within the field of chemical, engineering, electronics, food, medical treatment, water supply and drainage projects, construction materials, farm irrigation, sea breading, electricity communication and other industries.…

About Us ↗Visit company website ↗

Share:

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.