PVC takardar launin toka don hakar

Kauri kewayon: 1mm ~ 60mm
Nisa: 1mm ~ 3mm: 1000mm ~ 1300mm
4mm ~ 20mm: 1000mm ~ 1500mm
25mm ~ 30mm: 1000mm ~ 1300mm
35mm ~ 60mm: 1000mm
Tsawon: Kowane tsayi.
Matsakaicin masu girma dabam: 1220mmx2440mm; 1000mmx2000mm; 1500mmx3000mm
Surface:Glossy
Standard Launuka: Dark launin toka (RAL7011), haske launin toka, baki, fari, blue, kore, ja da kowane sauran launuka bisa ga abokan ciniki' bukatun.

Cikakkun bayanai

Halaye

Kyakkyawan sinadarai da juriya na lalata;
Ƙarfin tasiri mai kyau;
Sauƙi don ƙirƙira, walda ko inji;
Babban ƙarfi da ƙarfi mafi girma;
Amintaccen rufin lantarki;
Kyakkyawan fasali don bugawa;
Low flammability,
Kashe kai.

Aikace-aikace

PVC m zanen gado ana amfani da ko'ina a general da sinadaran masana'antu, kamar Lab kayan aiki, Etching kayan aiki, Semiconductor sarrafa kayan aiki, plating ganga, ruwa tank, sinadaran ajiya tank, man tanki, adana tanki ga Brewing ruwa, acid ko Alkali samar hasumiya, acid ko hasumiya na alkali, kayan haɓaka hoto; Masana'antar lantarki don akwatin baturi, farantin lantarki, tankin lantarki da faranti daban-daban don sanyaya wutan lantarki, allunan talla, bangon ofis da kayan aikin jama'a, fatunan kofa da sauransu.

Hakanan zamu iya samar da sassa masu niƙa daga madaidaicin takardar mu na PVC mai sheki.
Idan kuna buƙatar sassan niƙa guda ɗaya da aka yi da takaddar mu ta PVC, wannan ba matsala bane, muna da cibiyoyin niƙa CNC tare da kulawar CNC. Kawai aiko mana da bincikenku tare da zane ko zanen gini wanda ke bayyana adadin da ake buƙata kuma za mu shirya tayin da aka yi da tela don sassan niƙa da aka yi da takardar PVC ɗin mu.

Idan kuna sha'awar samfuranmu, zaku iya zaɓar barin bayanin ku anan, kuma za mu tuntube ku nan ba da jimawa ba.

Ku rubuta sakonku anan ku aiko mana

A'a.	Items	Requirement			Result
1	Density,g/cm3	ρ≤1.45			1.447
2	Mechanical Property	Tensile Strength/MPa		≥40	42.2
		Notch impact strength/ kJ/m2		≥5	5.5
3	Thermal performance	Vicat softening point/℃		≥75	78.0
		Heating dimension change rate/%	Transverse	±4	﹢0.5
			Direction	±4	－3.0
4	Corrosivity,g/m2 5h 60℃	35%±1 (V/V) HCL		± 1	0.55
		30%±1 (V/V) H2SO4		± 1	0.5
		40%±1 (V/V) HNO3		± 1	－0.8
		40%±1 (V/V) NaOH		± 1	0.05