Test Standard(QB/T 2490-2000) |
Unit |
Typical Value |
|
Physical | |||
Density |
0.94-0.96 |
g/cm3 |
0.962 |
Mechanical | |||
Tensile Strength(Length/Breadth) |
≥22 |
Mpa |
30/28 |
Elongation |
—– |
% |
8 |
Notch Impact Strength(Length/Breadth) |
≥18
|
KJ/㎡ |
18.36/18.46 |
Thermal | |||
Vicat Softening Temperature |
—–
|
°C |
80 |
Heat Deflection temperature |
—– |
°C |
68 |
Electrical | |||
Volume Resistivity |
ohm·cm |
≥1015 |
High-density Poly Ethylene also is known as HDPE is made from a cord of ethylene molecules (the poly part of polyethylene), and is famous for its light weight and high durability.
The preference of HDPE sheets is increasing from leaps and bounds in the market today, as it’s able to cut down on the material which is then used for producing and packaging products for its strength and weight.
It is also available at tap plastics in sheet form with either a smooth or textured surface. The textured surface is also called cutting board. Both smooth and textured surfaces are safe for food contact.
Light weight, non-toxic;
High abrasion resistance;
Good chemical resistance;
Excellent impact strength;
Low co-efficient of friction;
Very good welding and processing properties;
Excellent chemical and corrosion resistance;
Material will not chip, crack, peel or break;
Vacuum and heat formable grades available.
Extrusion process:
1.Raw material mix
2.Extrusion process
3.Finished ptoducts
1. Material mix
2. Hot processing
3. Machining process
4. Finished ptoducts
5. Package&delivery
ROHS certificate
Our company has our own laboratory, we will test the raw materials and finished products of 1mm HDPE sheet, and prohibit the outflow of unqualified products.
1.Food storage and freezing equipment;
2.Cutting boards, kitchen counters, kitchen shelves;
3.Protectivesurface in the food processing industries;
4.Chemical containers, medicine and food packaging;
5.Gas transportation, water supply,drainage, agricultural irrigation;
6.Clean room, semiconductor plant and related industrial equipment;
7.Machinery, electronics, electrical appliances, decoration and other fields;
8.Acid and alkali resistant equipment, environmental protection equipment;
9.Pump and valve components, medical applicance parts, seal, cutting board, sliding profiles;
10.Water tank, washing tower, waste water, waste gas discharge, water treatment equipment;
11.Outdoor recreational facilities and indoor house furniture, sound barrier, toilet partition, partition board and furniture.